EC Dental Science

Review Article Volume 24 Issue 1 - 2025

Comparison of Mini Implant in Fixed and Removable Prosthodontics: A Review Article

Salah A Yousief*

Department of Restorative and Prosthetic Dental Sciences, College of Dentistry, Dar Al Uloom University, Riyadh, Saudi Arabia and Department of Crown and Bridge, Faculty of Oral and Dental Medicine, Al Azhar University, Assuit Branch, Egypt

*Corresponding Author: Salah A Yousief, Department of Restorative and Prosthetic Dental Sciences, College of Dentistry, Dar Al Uloom University, Riyadh, Saudi Arabia and Department of Crown and Bridge, Faculty of Oral and Dental Medicine, Al Azhar University, Assuit Branch, Egypt.
Received: December 04, 2024; Published: December 27, 2024



Mini implants were developed as an alternative to conventional implants for usage in narrow alveolar ridges because of their smaller length and size. In orthodontic procedures, they also serve as anchors. Mini-implants provide streamlined therapeutic approaches with minimal cost, and perhaps a flapless surgical procedure that can decrease post-operative morbidity. As is the case with all implant research, they underwent in vivo testing using animal models before being used in clinical use. Mini-implants have a high rate of acceptability in therapy among patients thanks to their biomechanical characteristics. This article examines the use of prostheses and micro-implants in the treatment of edentulous individuals and provides recommendations for effective results.

 Keywords: Mini Implants; Dental Implants; Fixed Prosthetics; Removal Prosthetics

  1. Razaghi P., et al. “The effect of photobiomodulation therapy on the stability of orthodontic mini-implants in human and animal studies: A systematic review and meta-analysis”. Journal of Lasers in Medical Sciences 13 (2022): e27.
  2. Flieger R., et al. “Low-level laser therapy with a 635 nm diode laser affects orthodontic mini-implants stability: A randomized clinical split-mouth trial”. Journal of Clinical Medicine 1 (2019): 112.
  3. Costa ACF., et al. “Effects of low-level laser therapy on the orthodontic mini-implants stability: a systematic review and meta-analysis”. Progress in Orthodontics 1 (2021): 6.
  4. Demirsoy KK and Kurt G. “Use of laser systems in orthodontics”. Turkish Journal of Orthodontics 2 (2020): 133-140.
  5. Colonna A., et al. “Assessment of stiffness and load deflection of orthodontic miniscrews used for palatal anchorage: An in vitro biomechanical study”. International Orthodontics 4 (2020): 809-819.
  6. Casaña-Ruiz MD., et al. “Risk factors for orthodontic mini-implants in skeletal anchorage biological stability: a systematic literature review and meta-analysis”. Scientific Reports 1 (2020): 5848.
  7. Gallucci GO., et al. “Implant placement and loading protocols in partially edentulous patients: A systematic review”. Clinical Oral Implants Research 16 (2018): 106-134.
  8. Duong HY., et al. “Oral health-related quality of life of patients rehabilitated with fixed and removable implant-supported dental prostheses”. Periodontology 20001 (2022): 201-237.
  9. Park JH., et al. “Treatment outcomes for mandibular mini-implant-retained overdentures: A systematic review”. International Journal of Prosthodontics 3 (2017): 269-276.
  10. Goiato MC., et al. “Clinical outcome of removable prostheses supported by mini dental implants. A systematic review”. Acta Odontologica Scandinavica 8 (2018): 628-637.
  11. Mundt T., et al. “Survival and stability of strategic mini-implants with immediate or delayed loading under removable partial dentures: a 3-year randomized controlled clinical trial”. Clinical Oral Investigations 4 (2023): 1767-1779.
  12. Alauddin MS., et al. “The modern and digital transformation of oral health care: A mini review”. Healthcare (Basel)2 (2021): 118.
  13. Joda T., et al. “Disruptive innovation in dentistry: What it is and what could be next”. Journal of Dental Research 5 (2021): 448-453.
  14. Heboyan A. “Marginal and internal fit of fixed prosthodontic constructions: A literature review”. International Journal of Dental Research and Reviews 2 (2019): 19.
  15. Soliman TA., et al. “Assessment of stress distribution around implant fixture with three different crown materials”. Tanta Dental Journal 4 (2015): 249-258.
  16. Heboyan A., et al. “Cement selection in dental practice”. World Science 3 (2019): 4-9.
  17. Xu XY., et al. “”. Shanghai Kou Qiang Yi Xue3 (2017): 331-335.
  18. Becker W., et al. “Minimally invasive flapless implant surgery: follow-up results from a multicenter study”. Journal of Periodontology 2 (2009): 347-352.
  19. Romero-Ruiz MM., et al. “Flapless implant surgery: a review of the literature and 3 case reports”. Journal of Clinical and Experimental Dentistry1 (2015): e146-e152.
  20. Choi R. “A rationale for fixed restorations supported by mini dental implants: Case reports and practical case selection guidelines”. Compendium of Continuing Education in Dentistry 4 (2019): 238-245.
  21. Putra Wigianto AY., et al. “Treatment outcomes of implant-assisted removable partial denture with distal extension based on the Kennedy classification and attachment type: a systematic review”. International Journal of Implant Dentistry 1 (2021): 111.
  22. Kim JJ. “Revisiting the removable partial denture”. Dental Clinics of North America 2 (2019): 263-278.
  23. Zancopé K., et al. “Placement of a distal implant to convert a mandibular removable Kennedy class I to an implant-supported partial removable Class III dental prosthesis: A systematic review”. Journal of Prosthetic Dentistry 6 (2015): 528-33.e3.
  24. Molinero-Mourelle P., et al. “Clinical performance of tooth implant-supported removable partial dentures: a systematic review and meta-analysis”. Clinical Oral Investigations 10 (2022): 6003-6014.
  25. Yi Y., et al. “Clinical outcomes of implant-assisted removable partial dentures according to implant strategic position”. Journal of Prosthodontics 5 (2023): 401-410.
  26. Jung RE., et al. “Group 1 ITI Consensus Report: The influence of implant length and design and medications on clinical and patient-reported outcomes”. Clinical Oral Implants Research 16 (2018): 69-77.
  27. Wazeh AM., et al. “3D FEA study on implant threading role on selection of implant and crown materials”. Open Access Macedonian Journal of Medical Sciences 9 (2018): 1702-1706.
  28. Abuzar MA., et al. “Evaluating surface roughness of a polyamide denture base material in comparison with poly (methyl methacrylate)”. Journal of Oral Science 4 (2010): 577-581.
  29. Upendran A., et al. “Dental Mini-Implants”. In: StatPearls. Treasure Island (FL): StatPearls Publishing (2022).
  30. Dhaliwal JS., et al. “Osseointegration of standard and mini dental implants: a histomorphometric comparison [published correction appears in Int J Implant Dent. 2017 Dec 3(1): 28]”. International Journal of Implant Dentistry 1 (2017): 15.
  31. Hisam M., et al. “Finite element analysis of mini implant biomechanics on peri-implant bone”. Procedia Manufacturing 30 (2019): 308-314.
  32. Esposito M., et al. “The efficacy of various bone augmentation procedures for dental implants: a Cochrane systematic review of randomized controlled clinical trials”. International Journal of Oral and Maxillofacial Implants 5 (2006): 696-710.
  33. Narsingoju AM., et al. “Mini-implants, mega solutions: a review”. International Journal of Dental Materials 3 (2021): 96-99.
  34. Al Qahtani WM., et al. “Recent advances in material and geometrical modeling in dental applications”. Open Access Macedonian Journal of Medical Sciences6 (2018): 1138-1144.
  35. Wang S-H., et al. “Relationship between cortical bone thickness and cancellous bone density at dental implant sites in the jawbone”. Diagnostics9 (2020): 710.
  36. Annamalai I., et al. “Deflection of mini implants from its intended path of placement on varying bone densities”. Journal of Clinical and Experimental Dentistry 12 (2022): e1000-e1007.
  37. Cristache CM and Gurbanescu S. “Accuracy evaluation of a stereolithographic surgical template for dental implant insertion using 3D superimposition protocol”. International Journal of Dentistry (2017): 4292081.
  38. D'haese J., et al. “A prospective study on the accuracy of mucosally supported stereolithographic surgical guides in fully edentulous maxillae”. Clinical Implant Dentistry and Related Research2 (2012): 293-303.
  39. Jackson BJ. “Fixed partial denture treatment with mini dental implants”. Journal of Oral Implantology 6 (2014): 745-750.
  40. Shatkin TE and Petrotto CA. “Mini dental implants: a retrospective analysis of 5640 implants placed over a 12-year period”. Compendium of Continuing Education in Dentistry 3 (2012): 2-9.
  41. Ahn MR., et al. “Immediate loading with mini dental implants in the fully edentulous mandible”. Implant Dentistry4 (2004): 367-372.
  42. ELsyad MA., et al. “Marginal bone loss around unsplinted mini-implants supporting maxillary overdentures: a preliminary comparative study between partial and full palatal coverage”. Quintessence International 1 (2013): 45-52.
  43. Morneburg TR and Pröschel PA. “Success rates of microimplants in edentulous patients with residual ridge resorption”. International Journal of Oral and Maxillofacial Implants 2 (2008): 270-276.
  44. Singh RD., et al. “Management of atrophic mandibular ridge with mini dental implant system”. National Journal of Maxillofacial Surgery 2 (2010): 176-178.
  45. Bidra AS and Almas K. “Mini implants for definitive prosthodontic treatment: a systematic review”. Journal of Prosthetic Dentistry 3 (2013): 156-164.
  46. Threeburuth W., et al. “Comparison of immediate-load mini dental implants and conventional-size dental implants to retain mandibular Kennedy class I removable partial dentures: A randomized clinical trial”. Clinical Implant Dentistry and Related Research 5 (2018): 785-792.

Salah A Yousief. “Comparison of Mini Implant in Fixed and Removable Prosthodontics: A Review Article”. EC Dental Science 24.1 (2025): 01-10.